Jim-BC: Passed PMP on Aug 13 2009

Hi Everyone. I passed the PMP exam today and I want to share my lessons learned.

Total Study Time : about 2 months – Maybe less than 100 hours.(Nore from PMHUB admin: the original LL is archived in the LL Forum of PMHUB Forums)

I took my PMP training to get the contact hours in Apr 2008 and started the application in Aug 2008. Due to extremely busy work and personal life (who isn’t ) , I kept postponing my exam date and really didn’t have any time to study. Since the Aug is a real deadline for me otherwise I have to reapply , I started to put a little time at night to study in July and took a few days off in August to prepare.

Materials

PMBOK Guide Fourth Edition
I scanned this entire book at the last day. I read some chapters of 3rd edition long time ago and remembered it was very dry so I decided not to read this book this time. However, I found out the book is quite well written this time. It did have lot of charts and example to explain the thoery.

Overall: optional. Good for review.

Rita Mulcahy – PMP Exam Prep
First of all , I agreed with another LL in July. I don’t like the tone Rita put this book like “You will fail the exam if you don’t know ” or “You will miss a few questions if no real world expediences”. It is ok to repeat a few time but she did this too much. On the other side, I didn’t feel the Rita’s process chart is very useful. It just added something extra to memorize. I didn’t do the games but I did took most the questions after each chapter. The questions will really help you to recall the chapters. I will say skip all the PM stories in this book otherwise you may only remember those stories.

I was surprised this books didn’t cover ALL the meterial mentioned in PMBOOK on the last day. It made me a little nervous . However, I believe the book alone can make you pass the exam .The questions are close. The Rita’s questions are more wordy. In each chapter, there are a few questions which didn’t make sense and won’t show up on the exam. Generally I can score 70~80% after reading.

Overall : recommended.

Questions:
1. PMP head first free 200 questions. I feel these questions are closest to the real exam. They are even better than Rita’s questions. I scored 75% in this one.
2. Oliver’s 175 questions. I took the exam 2 days before the exam and only scored 65%. It made me very nervous so I started to read the PMBOOK. I feel the level of Oliver maybe too hard. He added some questions from other PM boook which are not necessary. Sometimes he
picked a few words from PM book and made a question which may not fit the real work exam. so don’t let this exam beat you down.

The Exam Itself

I arrived 30 minutes earlier and they let me started right away. I didn’t dump the formulas . I think I know the calculation portion pretty well.
After about 30 questions I know I will pass. The real exam is not so wordy . The funny thing is sometimes you can tell some questions are not real ones. These kind of questions mentioned some thing you never heard and they even have grammar errors. I marked about 50 questions and went through them again . It took me about 2.5 hours (I didn’t review the questions unmarked) and I decided to end the exam. I was very nervous at the last moment because the score didn’t show up immediately. I had to do the survey first. and then the congratutions showed up.

Generally the exam is not very hard. The EV questions are simple so I even didn’t use the calculator. If you prepare well and you will pass. There is no need to memorize the TT and I/O. I feel the exam question was written in a way even you are allowed to read the books, you won’t get it right without proper understanding. so it is better the understand the concept instead of remember them.

eg. What’s the different between quality assurance and quality control? If you can not even get this right, you may need to review the books again.

ok, I need to have a break now. In short, my LL is to don’t over study but also ensure don’t underestimate it. The PMP knowledge is really help in real life work so it is better to master the art.

A Busy PMP

No comments:

Post a Comment

NMA sample Project Plan outline with descriptions

Newman Management Associates PM template – all rights reserved 2002 NMA

Project Plan
For
Project Name

By
Project Manager's Name and/or Team Members

Revision Number:
Date of Revision:

Prepared by:

Approved by:
Approved by:
Revision Number:
Date of Revision:

Prepared by:

Approved by:
Approved by:

Table Of Contents

1.0 Introduction

2.0 Project Overview and Charter

3.0 Goals and Objectives

4.0 Statement of Work and Scope Requirements

5.0 Work Breakdown Structure and Dictionary (optional)

6.0 Schedule

7.0 Project Staffing (optional) Responsibility Matrix

8.0 Estimate-time phased Budget/Resource Requirements

9.0 Assumptions

10.0 Risks

11.0 Project Reporting and Control

12.0 Change Control

13.0 Constraints

14.0 Communication Planning

15.0 Quality Planning

16.0 Contracts and Procurement Planning

17.0 Project Completion

Project Plan Outline

1.0 INTRODUCTION
Problem/Opportunity Statement which serves as the genesis for the project

2.0 PROJECT OVERVIEW AND CHARTER
General description of the project including goals, length, risks and benefits. Also prepare a Project Charter which identifies project purpose, impact statement, and interfaces with outside organizations.

3.0 GOALS AND OBJECTIVES
The Project Goals and Objectives should include measurable criteria that should be met for project to be considered a success. (Cost, Schedule, and Quality). The results of a project preliminary cost/benefit analysis (ROI, NPV, payback period, etc.) should be incorporated, as appropriate, into this section. The goals and objectives described in this section will be used to:
· Guide project execution, document project planning assumptions and decisions regarding alternatives chosen.
· Facilitate communication among stakeholders and to assist in defining key management reviews.
· Provide a baseline for progress measurement and project control.

4.0 STATEMENT OF WORK AND SCOPE REQUIREMENTS
· The Statement of Work (SOW) is a narrative description of the entire known work scope and should reflect all of the work necessary to successfully complete the project.
· The SOW should be structured into paragraphs and subparagraphs using the same structure reflected by the Work Breakdown Structure (see the next section for more description).
· The requirements for features and functions should be clearly distinguished in that they define what is and is not included in the project.
· Statement of Work preparation that provides for a common understanding of the project scope among the stakeholders. It should include:

A. Project Product - Summary of the product description.
B. Project Deliverables - Dividing the SOW major components into smaller, more manageable components. Exclusions should be identified where possible.

5.0 WORK BREAKDOWN STRUCTURE
A Work Breakdown Structure (WBS) is a deliverable-oriented grouping of project elements that organizes and defines the total scope of the project. It is used to develop or confirm a common understanding of the scope, with each descending level representing an increasingly detailed description of the project elements. Each item in the WBS is assigned a unique identifier, and may be described in a WBS dictionary for each cost account; i.e., manageable chunk of work assigned to a single responsible organization/person for the management of scope, schedule, and cost . It may also be coded to include the cost account structure.

6.0 SCHEDULE
This section describes the schedule processes required to ensure timely completion of the project. The following is an overview of the major processes.
· Activity/Task/Subtask Definition - Identify the specific activities to be performed in order to produce the various
project deliverables. Also identify the milestones which relate to project progress and outcomes.
· Activity/Task/Subtask Sequencing - Identify the inter-activity dependencies, key milestones and constraints.
· Activity/Task/Subtask Duration’s - Estimate the duration of time that will be needed to complete individual activities.
· Schedule Development - Analyze and input collected data into the schedule, analyzing sequences, duration’s and resource requirements.

7.0 PROJECT STAFFING
Using the SOW and Project Work Breakdown Structure to identify necessary skills sets, a project team should be selected and negotiated to perform specific tasks and subtasks of the project scope. The Project Team structure should be matched against the Project WBS in the form of a Responsibility Matrix. A Project Responsibility Matrix should be completed to document the project team responsibilities and duties.

8.0 BUDGET/RESOURCE REQUIREMENTS
There are three major processes covered in the project budget/resource requirement plan to ensure that the project will be completed within the approved budget.
· Cost Estimating - An approximation of the costs of the resources needed to complete the work, with consideration being given to various costing alternatives.
· Cost Budgeting - Allocating the overall cost estimate, based on the scope of work, to individual work items in order to establish the project cost baseline. In turn, this project cost baseline will be used to measure and monitor cost performance.
· Resource planning - Defining required resources necessary to accomplish the work, including development of a Responsibility Matrix to identify team member responsibilities and the necessary communications network for the project.

9.0 ASSUMPTIONS
Assumptions must be formed and utilized in all areas, especially where clear definition is unavailable. The success or failure of an assumption is critical in determining its current or future use in a project. Assumptions should be identified throughout the initial planning phase and documented in this section for all scope/quality, cost and schedule plans. The detailed record of assumptions will identify the assumptions for all appropriate components within the project plan. Key Assumptions for project cost accounts may be documented in the WBS Dictionary. Other assumptions should be documented with the preparation of all other planning documents regarding scope, quality, schedule, and costs.

10.0 RISKS
Risk management consists of procedures that will be used to manage risk throughout the project. This section will provide an overview of the following major processes.
· Risk Identification - risks that are likely to affect the project.
· Risk Quantification - evaluate risks and risk interactions to assess the possible outcomes.
· Risk Response Development - define enhancement steps for opportunities and responses to threats.
· Risk Control/Reporting - track the risks, their impacts, and the effects of mitigation planning and implementation actions.

A Risk Analysis Worksheet can serve to document risk Identification, Quantification, Response Development, and Control/Reporting.

11.0 PROJECT REPORTING AND CONTROL
Reporting - Periodic project reporting of cost, schedule and technical performance should be identified and carried out throughout the project life cycle. This should include identification of reporting content such as distribution lists, management reviews and corrective actions. Recurring project review meetings should also be planned and included in this section.

Control - Management review of project status, corrective action planning and implementation to mitigate project performance problems. Control should be focused in four areas:
· Work scope and technology application - evaluate whether work is being accomplished in accordance with the approved project scope and whether relevant technology is meeting project objectives. Definition of the methods and application of earned value techniques should be documented in this section.
· Cost Control - Monitoring the project cost performance against the project baseline to ensure minimum cost, consistent with the approved scope of the project.
· Schedule Control - Monitoring the project schedule performance against the project baseline to ensure timely completion.
· Risk Response Control - Evaluate how individual performance problems may have an impact across all project objectives: scope, schedule and cost. Carry out comprehensive risk mitigation planning as needed.

12.0 CHANGE CONTROL
Overall change control is concerned with (a) influencing the factors which create changes, (b) determining that a change has occurred, (c) managing changes as they occur. This requires:
· Maintaining sound performance measurement baselines.
· Ensuring that changes to the product scope are incorporated and reflected in the definition of the project scope. The change order log will be the document that will capture all changes.
· Coordinating changes across knowledge areas. (Schedule changes will often affect cost, risk, quality and staffing.)
· Assuring clear change identification, management approval, and formal implementation of the changes in the project baseline.

13.0 CONSTRAINTS
Constraints can have a positive or negative affect on a project. Whenever possible, constraints (internal or external) will be identified for each project. Types of constraints might include (among others):
· Project milestones
· Resource availability
· Delivery dates
· Regulatory agency delay

14.0 COMMUNICATION PLANNING
Project Communications planning includes the processes required to ensure timely and appropriate generation, collection, dissemination, storage, and ultimate disposition of project information. It provides the critical links among people, ideas, and information that are necessary for project success.

The major processes which should be documented herein, to the extent applicable, and followed by the project manager and team include the following.

· Communication Planning - determining the information and communication needs of the stakeholders: who needs what information; when will they need it; and how will it be given to them.All recurring Project meeting planning should be included.
· Information Distribution - making needed information available to project stakeholders in a timely manner.
· Performance Reporting - collecting and disseminating performance information. This includes status reporting, progress measurements and forecasting. Cite appropriate references to Sections 11.0, 17.0, and others applicable in this Project Plan.
· Administrative Closure - generating, gathering and disseminating information to formalize phases or project completion.

15.0 QUALITY PLANNING
Project Quality planning includes the processes required to ensure that the project will satisfy the needs for which it was undertaken. This includes all activities that determine the quality policy, objectives, and responsibilities.

The major processes which should be documented herein, to the extent applicable, and followed by the project manager and team include the following.

· Quality Planning - identifying which quality standards are relevant to the project and determining how to satisfy them.
· Quality Assurance - evaluating overall project performance on a regular basis to provide confidence that the project will satisfy the relevant quality standards.
· Quality Control - monitoring specific project results to determine if they comply with relevant quality standards and identifying ways to eliminate causes of unsatisfactory performance.

16.0 CONTRACTS AND PROCUREMENT PLANNING
Project Contracts and Procurement planning includes the processes required to acquire goods and services from outside the performing organization. These goods and services, or "products" are acquired through six processes.

The major processes which should be documented herein, to the extent applicable, and followed by the project manager and team members are as follows.

· Contract/Procurement Planning - determining what to procure and when, including long lead items.
· Solicitation Planning - documenting product requirements and identification of potential sources.
· Solicitation - obtaining quotations, bids, offers, or proposals as appropriate.
· Source Selection - choosing from among potential sellers.
· Contract/Procurement Administration - managing the relationship with the seller.
· Contract/Procurement Close-out - completion and settlement of the contract/procurement, including resolution of any open items.

17.0 PROJECT COMPLETION
Planning for project completion during the early stages of the Project Life Cycle will be ensure that all of the necessary project completion deliverables are captured. These deliverables could be used for future projects as reference and/or audit purposes.

Project completion deliverables can include but are not limited to the following:

Deliverables
Initial
Final
All
Project Plan
x
x

Scope of work
x
x

Estimate
x
x

Cost Statements
x
x

Change Order Request

x
Schedules
x
x

Monthly Status Reports

x
Engineering Drawings

x

Specifications

x

Summary of Deliverables

x
Project File Index

x
Lesson Learned

x
Other Project Specific

Change Order Log
x
x

NMA

NEWMANagement Strategies

Thursday, August 20, 2009

PMP test Lessons Learned (from Linkbee)

Jim-BC: Passed PMP on Aug 13 2009

No comments:

Newman Management Associates - NMA

Blog Archive

Contributors

Search This Blog

PM related positions/job opportunities (not responsible for accuracy, completeness or currency)

Continuous Measureable Improvement cycle

Sample Agenda for PM or Team Meeting

NMA sample Project Plan outline with descriptions

Resources, Suppliers and Links

Project Management glossary/terms

PM related references

PMI seminar

People don’t plan to fail…they fail to plan